Google has added a 30-day limit on sale duration to the Merchant Center help page that governs when a product shows a struck-through original price and a sale badge across Google Search, Shopping ads and the Shopping tab. According to the page, "for a sale to be recognized as a temporary reduction, the base price should ideally be the sole active price at times and sale price [sale_price] duration should not exceed 30 days." PPC News Feed reported the change on November 17, 2026, ten days before Black Friday.

In Short

Google's help page on sale price annotations now says a sale price should not run for more than 30 days if the sale is to count as a temporary reduction. That matters to any retailer that uses the sale_price attribute to get the strikethrough price and sale badge on Shopping ads, free listings and local inventory ads, especially during long holiday promotions. The existing rules on discount size and base price history are unchanged, so the note adds a limit on sale length on top of them rather than replacing anything.

What the note says

The note sits at the top of the Requirements section of the page titled "About sale price annotations," above every country-specific list. It names no markets. Its full text reads: "Note: For a sale to be recognized as a temporary reduction, the base price should ideally be the sole active price at times and sale price [sale_price] duration should not exceed 30 days."

Two parts of that sentence carry the weight. The first, about the base price being "the sole active price at times," is loose: the page does not define how often "at times" is, or for how long. The second is specific. A sale price, submitted through the optional sale_price attribute, "should not exceed 30 days."

The verbs matter as well. Every requirement bullet further down the page uses "must": the sale price "must be lower than the base price," the discount "must be greater than 5% and less than 90%," and the base price "must be valid" or "must be charged" for set periods. The new note uses "should" and "should ideally." Google does not say whether a sale that runs 31 days loses its annotation automatically, is reviewed, or is simply less likely to be treated as a temporary reduction.

PPC News Feed, which reported the change, put it in firmer terms. "Sale prices must now be limited to a maximum duration of 30 days to qualify as temporary reductions," according to the site, which credited Hana Kobzová with spotting the update. Its article reproduces the Requirements section with the note outlined in red, and says the change "affects how sale price annotations appear on free listings, Shopping ads, and local inventory ads."

What changed, and what did not

PPC News Feed also wrote that "previously, the 30-day window was a requirement only in select countries, but it is now a universal requirement." The help page itself does not bear out that reading in full. Two different 30-day figures appear on it, and they measure different things.

The older one counts how often the base price was active. In nine markets for free listings and twelve for Shopping ads, the base price "must be valid for 30 days within the past 200 days (doesn't need to be 30 consecutive days)." That requirement is still on the page, and it still names the same countries. It was not extended to other markets.

The new note counts something else: how long the sale price runs. It applies to no listed country in particular, which is why it reads as universal. But it adds a limit on the length of the sale. It does not turn the country-specific base price rule into a global one.

PPC Land's own earlier coverage recorded the rules without any duration limit. On September 20, 2026, PPC Land set out the 5% to 90% band and the 30-of-200 base price rule, and on October 21, 2026 its year-end sale piece described the US 5-of-30 and 15-of-200 rule and the 30-of-200 rule for the UK, Germany, France and nine other markets. Neither mentioned a cap on how long a sale may last. On November 22, the British English and Latvian versions of the same help page still showed the requirements without the 30-day note, while the default English version carried it.

The idea itself was not unknown among feed specialists. Channable, a feed management company, wrote in a blog post dated August 26, 2026 that a sale should last 30 days or less, otherwise Google may treat the lower price as the new standard and stop showing the sale annotation. The help page carries no publication or update date, so exactly when Google wrote the figure into its own documentation cannot be established from the page.

The requirements, market by market

The note sits on top of a set of rules that vary by surface and by country. The page lists the same 13 markets for both free listings and Shopping ads, but splits them differently.

Surface Markets Discount band Base price history Landing page
Free listings Australia, Canada, United States, Japan Greater than 5% and less than 90% None stated Original price and sale price should be displayed
Free listings Brazil, France, Germany, India, Italy, Korea, the Netherlands, Spain, United Kingdom Greater than 5% and less than 90% Valid for 30 days within the past 200 days, not necessarily consecutive Original price and sale price should be displayed
Shopping ads United States Greater than 5% and less than 90% Charged for 5 days within the past 30 days, or 15 days within the past 200 days, whichever is met first; neither needs to be consecutive Original price and sale price should be displayed
Shopping ads Australia, Brazil, Canada, France, Germany, India, Italy, Japan, Korea, the Netherlands, Spain, UK Greater than 5% and less than 90% Valid for 30 days within the past 200 days, not necessarily consecutive Original price and sale price should be displayed
Local inventory ads (product pages with in-store availability or pickup later) Same as Shopping ads Same as Shopping ads Same as Shopping ads Same as Shopping ads
Local inventory ads (store-specific product pages with in-store availability and price) Only countries where the sale annotation shows for Shopping ads Greater than 5% and less than 90%, per store Valid for 60 days within the past 200 days in a particular store, or 60 consecutive days if the product has been active for less than 200 days Not stated
All surfaces (new note) No countries named Not stated Base price "should ideally be the sole active price at times"; sale price duration "should not exceed 30 days" Not stated

Some of the splits are not obvious. Australia, Canada and Japan carry no base price history rule for free listings, yet the same countries carry the 30-of-200 rule for Shopping ads. The United States has no history rule for free listings and a two-way rule for Shopping ads. And in every case, the sale price must be lower than the base price.

The look-back windows translate into different shares of time at the base price. The table below is a PPC Land calculation from the figures on the help page.

Rule (from the help page) Days at base price Window Share of window (PPC Land calculation)
US Shopping ads, short window 5 30 days 16.7%
US Shopping ads, long window 15 200 days 7.5%
30-of-200 markets, free listings and Shopping ads 30 200 days 15%
Store-specific local inventory ads 60 200 days 30%

Under the US short window, the base price can be active for as few as 5 of the previous 30 days, which leaves room for 25 days at other prices. The new note says the sale itself should not exceed 30 days. The page does not say whether two sales separated by a few days at the base price would each count as a fresh temporary reduction.

How it works, according to Google

The page describes the mechanics in a set sequence, and the steps below record what it says.

  1. Original price. The merchant submits the original price in the data source using the required price [price] attribute. According to Google, the original price can keep being submitted through price "even during the time of the sale."
  2. Sale price. When the price drops for a sale, the reduced figure goes into the optional sale price [sale_price] attribute. Google's attribute specification adds that the dates of a sale go into a separate sale_price_effective_date attribute, and that without a date range the sale price applies to the product immediately. That specification sets no maximum length for a sale, and it does not repeat the 30-day note.
  3. Landing page. According to the help page, "the active sale price should be the most prominent price on the page," while the original price "should be less prominent, can be struck through, grayed out, or otherwise displayed to show that it's not currently active."
  4. Validation. According to the page, "Google regularly validates the sale price" on the merchant's website "to ensure that useful and high quality sale price annotations are surfaced on Google."
  5. Display. When the conditions are met, the sale price shows as the current price beside the original price with a strikethrough, and the product gets a badge highlighting the sale. Colors differ by surface, and prices appear in local currency and language.
  6. No guarantee. Even when every requirement is met, annotations "aren't always guaranteed to show," according to Google, because "Google wants to ensure that the best performing annotations surface."

The page also sets out how to check which products currently qualify. According to Google, the path in Merchant Center has four steps: go to Products under "Products & store" in the left navigation menu; select All products; select the Filter icon, choose "Has sale badge" and pick Yes; then select Apply. There is a caveat. For merchants using store-specific product pages with in-store availability and price, the sale badge filter "will not accurately reflect the status" of sale annotations shown on local inventory ads.

Three ways to show a discount, three rulebooks

Sale price annotations are one of several discount signals Google draws from product data, and the page keeps them apart. "Sales prices shouldn't be submitted as promotions," it states. Sale price is an attribute in the product or inventory data source; promotions, in Google's words, are "a supplemental feature that allow merchants to highlight special offers."

A third signal works without any merchant input. According to Google's separate page on price drop annotations, a "Price drop" badge can appear automatically when a product's price falls below the average price listed over the previous 60 days. Google says sale price annotations and price drop annotations have separate requirements.

The promotional toolkit has been growing. PPC Land reported in November 2025 that Merchant Center added audience targeting for Shopping promotions, and in December 2024 that it had added a first-order discount option. On November 8, 2026, PPC Land covered discount tags reaching Demand Gen ads on YouTube Shorts, available only with a Merchant Center product feed. Member prices took a different route: from July 1, 2025, Google stopped allowing member prices in the price and sale_price attributes, sending them to the loyalty_program attribute instead.

Annotations as a category are moving too. Four days after its sale price report, on November 21, 2026, PPC News Feed reported that Google had removed the "experimental" label from the Deal Ends annotation.

Why 30 days sounds familiar

Google's note cites no law. The number, though, is the same one that anchors European price reduction rules. Article 6a of the Price Indication Directive, inserted by the Omnibus Directive and applicable since May 28, 2022, requires any announced price reduction to show the lowest price of the previous 30 days, as PPC Land set out in its year-end sale piece. PPC Land notes the arithmetic: once a reduced price has been in place for 30 days, it is itself the lowest price of the previous 30 days, and any fresh reduction announced from that point would be measured against it.

The two systems measure different things. Google's base price rule for France, Germany, Italy, the Netherlands and Spain looks back 200 days and asks for 30 days at the base price; the EU rule looks back 30 days and asks for the lowest price. Google's rules are conditions for a badge on its own surfaces. They are not a test of whether a discount claim is lawful.

Regulators and courts have been active on the same territory. In September 2026, Australia's competition regulator fined digiDirect $99,000 over strikethrough discounts, citing a keyboard at $149 against a struck-through $229 that was rarely advertised and almost never sold at the higher price. In April, an Australian court ordered Emma Sleep to pay $15 million for fake countdown timers and phantom discounts, covering 74 products, 58 of which had never been offered at the strikethrough price. HSK United paid $79,200 in June over similar claims. In the United States, a federal judge in California on October 22 let a class action against Brooks Brothers proceed over a polo sold at $39.99 next to a struck-through $89.50, a case built on California's three-month prior-price rule.

Each of those cases turned on the same question Google's note now raises for its own badge: when does a reduced price stop being a sale and become simply the price?

Why this matters for retailers and agencies

The timing is hard to miss. The note surfaced in the middle of the holiday trading period. PPC Land's year-end sale coverage recorded the National Retail Federation's forecast of $1.013 trillion in US November and December retail sales, up 4.2%. A sale price that goes live in the first week of November and stays until Christmas runs for about seven weeks, well past 30 days.

The rules also reach further than they did a year ago. Google's Shopping tab began mixing sponsored tiles into free listing grids in April 2026, and from August 31, 2026, Google switched local inventory ads on for all Shopping campaigns. Both changes bring more placements under the Shopping ads and local inventory ads rules set out above.

There is a documentation pattern here too. Changes to Merchant Center help pages often arrive without an announcement or a date, and practitioners find them. In October, PPC Land reported that Google stopped blocking low-quality product images from ads and free listings after a help page wording change spotted by Search Engine Roundtable. Feed data also does not always move as fast as the rules: in January, a test documented by FeedArmy found Merchant Center's 24-hour automatic import running nine days late. That lag is relevant to any count of sale days, since the help page does not say whether Google measures them from the feed or from the website.

What the page does not say

The help page does not say what happens to the annotation on a sale that runs longer than 30 days, from what date the 30 days are counted, whether the sale_price_effective_date range is the reference, how a gap at the base price resets the count, or when the note was added. It gives no figures on how many products currently show sale annotations.

Key facts

  • Source document: "About sale price annotations," Google Merchant Center Help, answer 9017019, https://support.google.com/merchants/answer/9017019. No publication or update date shown.
  • New text: "Note: For a sale to be recognized as a temporary reduction, the base price should ideally be the sole active price at times and sale price [sale_price] duration should not exceed 30 days."
  • First reported: "Merchant Center Caps Sale Price Annotations," PPC News Feed, November 17, 2026, https://ppcnewsfeed.com/ppc-news/2026-11/merchant-center-caps-sale-price-annotations/. Change credited to Hana Kobzová.
  • Language versions: on November 22, 2026, the default English page carried the note; the British English and Latvian versions did not.
  • Attributes: price [price] (required), sale price [sale_price] (optional), sale price effective date [sale_price_effective_date].
  • Discount band: greater than 5% and less than 90%, all listed markets and surfaces.
  • Base price history: US Shopping ads, 5 days within 30 or 15 within 200; 30 within 200 in 9 markets (free listings) and 12 markets (Shopping ads); store-specific local inventory ads, 60 within 200 or 60 consecutive days.
  • Markets listed: Australia, Brazil, Canada, France, Germany, India, Italy, Japan, Korea, the Netherlands, Spain, United Kingdom, United States.
  • Surfaces: free listings, Shopping ads, local inventory ads; display across Google Search, Shopping ads and the Shopping tab, on mobile and desktop.
  • Merchant Center filter: Products, All products, Filter, "Has sale badge," Yes, Apply.
  • Related Google pages: Sale price [sale_price] (answer 6324471); About price drop annotations (answer 14991443, 60-day average price).

Timeline

Summary

Who: Google, through its Merchant Center Help documentation, and the retailers and agencies that submit sale prices for Shopping ads, free listings and local inventory ads in 13 listed markets. PPC News Feed reported the change and credited Hana Kobzová with spotting it.

What: The "About sale price annotations" help page now carries a note stating that, for a sale to be recognized as a temporary reduction, the base price "should ideally be the sole active price at times" and the sale price duration "should not exceed 30 days." The existing 5% to 90% discount band and the country-specific base price history rules are unchanged.

When: PPC News Feed reported the note on November 17, 2026. The help page carries no date. On November 22, 2026, the default English version showed the note and the British English and Latvian versions did not.

Where: Google Search, Shopping ads and the Shopping tab, across Australia, Brazil, Canada, France, Germany, India, Italy, Japan, Korea, the Netherlands, Spain, the United Kingdom and the United States, on mobile and desktop.

Why: Google's page ties the note to whether a sale counts as a temporary reduction, which is a condition for the strikethrough price and sale badge. The page does not explain the change or say what happens to sales that run longer than 30 days.